Sears 274.4394859 - Manual (Page 16)

With a Laserdisc Player: Programming and Basic Operation
Refer to your Laserdisc Player owner's manual to hook up your Laserdisc Player.
The remote may need to be programmed for your laserdisc player, but may
not operate all models of the brands listed below.
Use the codes below or on the
sheet packed in with your remote.
Using Your TV and Remote
Program the remote for
your Laserdisc Player
CONNER ¡^TCABLS rv
vcr 2« ld audio I
CHA/V
PAUSE
o
A. Point the remote at the
laserdisc player and hold
VCR2* LD.
B. Enter the code for your brand
from the code list below.
C. Release VCR2»LD.
D. Press POWER. If nothing
happens, try pressing
VCR2»LD and then POWER.
Basic Operation
_ o
cha H prevch
^ MOVE 1^
A. Tune TV to channel 00,03,
or 04.
B. Point the remote at the laserdisc
player and press VCR2»LD.
C. Press POWER to turn it on.
8Q 'O
1
D. Use the buttons on the remote
1
that relate to laserdisc player
INPUT r» ANTENNA
1
o 1
1
functions. Not all buttons
O 1
highlighted may work with
CLEAR ^
•
A, RESET
1
# 1
1
your laserdisc player.
1
E. Press POWER to turn it off.
1
Laserdisc Player Codes
Pioneer........................ 33
ProScan.......................33
RCA............................ 33
14