Sears 580.75151 - Manual (Page 10)

OPERATION
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUR
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHER
« First, move engine throttle lever to “OFP position (Fig.
9).
1 Al C CT A 0*T
IL/L.C rMO 1 ijht
1
o
(TG* 9
® Simply shutting OFF engine will not release pres­
sure In the system. Pull the trigger on the spray wand
assembly to relieve the pressure in the hose.
NOTE: A small amount of water will squirt out when you
release the pressure.
SPRAY NOZZLES
Your high pressure washer comes equipped with an adjust­
able nozzle (Fig. 12). Attach nozzle as shown in Fig. 10
and HAND TIGHTEN the plastic knob. Figure 12 shows the
optional turbo nozzle.
HOW TO USE ADJUSTABLE NOZZLE
A WARNING: NEVER ADJUST SPRAY PATTERN
WHEN SPRAYING. NEVER PUT HANDS IN FRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT
TERN.
With the adjustable nozzle you can adjust the spray pattern
to be either high pressure or low pressure. You can also
adjust tfie spray so It is concentrated tn a stream pattern or
expanded into a fan pattern. Us© this nozzle to apply
detergent.
® Push the nozzle attachment forward when you wish to
adjust the spray to low pressure mode (Fig. 12). Push
the nozzle backward to achieve high pressure.
o Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream.
o You can also adjust the pressure by turning the pres­
sure control knob (Fig. 13) to the desired pressure
setting. Turning this knob all the way clockwise pro­
duces the fiighest pressure Do not unscrew the pres­
sure control valve more than 3 turns. It will come off.
1,43
NOZZLE IN HIGH
PRESSURE MODE
PUSH NOZZLE FORWARD FOR
LOW PRESSURE MODE AND DE­
TERGENT APPLICATION
T\A/iCiT K!rV7*7i CT TA I VViiTi I I.ft? I V J
EXPAND SPRAY
TWIST NOZZLE TO NARROW
SPRAY STEAM
FIG. 12
10