Sears 917.25147 - Manual (Page 8)

ASSEMBLY
Inspection for corrosion.
Testing battery.
Jumping (if required).
Periodic charging.
INSTALL SEAT {See Fig. 3)
Adjust seat before tightening adjustment bolt.
• Remove cardboard packing on seat pan.
• Place seat on seat pan and assemble shoulder bolt.
® Assemble adjustment bolt, lockwasherandflatwasher
loosely. Do not tighten.
® Tighten shoulder bolt securely. . .
® Lowe, seat into operating position and sit on seat.
® Slide seat until a comfortabie position is reached which
allows you to press clutch/brake pedal all the way
down.
'
® Get off seat without moving its adjusted position.
• Raise seat and tighten adjustment bolt securely. ^
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purposes. Correct tire pressure is important for
best cutting performance.
® Reduce tire pressure to PSi shown in “PRODUCT
SPECIFICATIONS” on page 3 of this manual.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted. See ‘TO ADJUST
BRAKE" in the Service and Adjustments section of this^
manual.