Sears KENMORE 385. 1254180 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION
2.
PREPARE- YOUR MACHINE FOR SEWING
Set Up the Madne (Continued)
Screw thread spool pins in place securely
with a screw driver.
Position spool pin feits as shown in illustra
tion.
For winding the bobbin while your machine
IS threaded, you can use an extra spool pin
withoutunthreading themacine.
your presser foot.
You can raise it about 1/4" higher for easy
removal of the presser foot or to help you
place heavy fabrics under the presser foot.
This manual is related to the following products: