Sears KENMORE 385. 1254180 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Know What the Presser Feet Will Do
The Presser feet are an important feature of this machine. You need to know what each foot does m order to use them effectively.
« Change the Presser Foot
a Presser Foot Types
Use the correct presser foot for the stitch
Zigzag Foot
Straight Foot
you wish to sew. Consult the practical
Stitch Chart on pages 23 ~ 25 and the
detailed directions for sewing with the
various presser feet.
To change the various presser feet, raise the
presser bar to its highest position by lifting
the presser foot lever. Loosen the presser
foot thumb screw, choose the proper toot,
insert from the bottom. Tighten the screw
using the large screw driver to make certain
the foot is secure.
Use this foot for both straight and zigzag
stitching.
Uses: Straight stitching (see p. 26).
Topstftchjng (see p. 27j,
Straight stretch (see p. 28).
Zigzag stitching (see p. 29},
Bar tacking (see p. 31 j.
Button sewing {see p. 33),
Rick-rack stretch (see p. 34),
Mending {see p. 35).
Overcast stretch (see p. 36),
Serging {see p. 36).
Blind hemming (see p. 37).
Lace work (see p, 38),
Shell stitching (see p, 43),
Smocking (see p. 43),
Elastic stretch (see p. 44),
Box stitching (see p. 44).
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see p. 26),
Topstitchmg (see p, 27),
Straight stretch (see p. 28)