Sears KENMORE 385. 1254180 - Manual (Page 44)

SECTIONS. LEARN THE STITCHES
Sew in a Zipper ICotitinued)
9. Lower the presser foot and stitch
the rest of the seam.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing through
the center ho!e of the foot and one groove of
the foot IS riding on the teeth of the zipper as
shown.
Follow the zipper manufacturer's inst­
ructions. After zipper has been inserted, finish
sswing seam bv shifting foot to sida position
sawing through side notch.
CORDING
Foot can also be used to make eorcfina for slip­
covers etc. Cover a cord with a strip of bias
fabric and
sew as shown.
NOTE;
Use "Low Bar Sewirtg Machine ZIPPER FOOT”
j67S7| for '^invjslbfe Zipper” arid "cording”.
wHich can be obtained at any Sears retell store.
right side of the needle.
12. Stitch across and below the bot­
tom of the Zipper.
13. Turn the corner and continue to
guide the foot along the zipper
teeth, as shown.
Stitch through the fabric and
Zipper tape.
15, Lower the needle Into the fabric
and raise the presser foot.
16, Remoue the basting stitches and
open the zipper.
17, Lower the foot and stitch the rest
of the seam. Make sure the fold is
even.
42