Flex FLS Roof Edge - Manual (Page 2)

FLEXLOCK FLS ROOF EDGE
____________________________FULLY ADHERED OR MECHANICALLY ATTACHED SINGLE-PLY VERSION
FA-50 TO FA-80 ANSI/SPRI ES-1 DESIGN PRESSURE OF 160 psf FA-95 TO FA-125 ANSI/SPRI ES-1 DESIGN PRESSURE OF 110 psf
FASCIA COVER (12'-0" [3.65 m] LENGTHS)
• 24 GA. (.65 mm) SPRING CLIP 4'-0" (1.22 m) O.C.
24 GA. (0.65 mm)
GALV. STEEL
WATERDAM r
MEMBRANE
NOTES:
FASCIA INCLUDES 3 1/2" (89 mm)
WIDE SPLICE PLATE AT JOINTS.
FASCIA IS TO BE INSTALLED PER SPECIFICATIONS AND FLEX'S
INSTALLATION INSTRUCTIONS DWG. # 28110-11350
HOLES PRE-PUNCHED 6" (152 mm) O.C.
FASTEN PER JOB REQUIREMENTS.
1 1/4" (32 mm) GALV. RING SHANK
ROOFING NAILS PROVIDED
FASTEN PRE-PUNCHED WATERDAM 12" (305 mm)
O.C. WITH 1 1/4" (32 mm) GALV. RING SHANK
ROOFING NAILS (PROVIDED)
FLEXLOCK FLS ROOF EDGE DIMENSIONS
PRODUCT
ID. NO.
H
DIM
X
DIM
NAILER
COVERAGE
□ FA-50 5 1/4" (133 mm) 2 7/8" (73 mm) 1 NAILER
□ FA-65 6 3/4" (171mm) 4 3/8" (111 mm) 2 NAILERS
□ FA-80 8 1/4" (210 mm) 5 7/8" (149 mm) 3 NAILERS
□ FA-95 9 3/4" (248 mm) 7 3/8" (187 mm) 4 NAILERS
□ FA-110 11 1/4" (286 mm) 8 7/8" (225 mm) 5 NAILERS
□ FA-125 12 3/4" (324 mm) 10 3/8 ' (264 mm) 6 NAILERS
MATERIAL:
*Oil canning can
___ 24 Ga. (.65 mm) Galv. Steel*
occur on larger face .040" (T01 mm) Alum.*
heights. Recommend
.050" (1.27 mm) or .063"
___ .050" (1.27 mm) Alum.
(1.60 mm) for face
heights above
8K" (210 mm).
___ .063" (1.60 mm) Alum.
OTHER
Color:
Finish:
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: _____
QUANTITIES:
Lineal Feet 12'-0" (3.65 m) Lengths
. Outside Miter(s) @ (_________ °)
. Inside Miter(s) @ (_________°)
. Right Endcap(s)
. Left Endcap(s)
, Right Endwall Flashing(s)
Left Endwall Flashing(s)
. Overflow Scupper(s) Style_
, Spillout Scupper(s) Style_______
Downspout Scupper(s) Style.
(_____ X______ ) Size
A: Tapered 1 1/2" (38 mm) Drop
B; Flat
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800-969^0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT# OF
DWG# 28010-11348
p: 800-969-0108
f: 610-916-9501
print approval
45