D. how to attach throwaway bag, C. attaching outer bag to cleaner, D. how to attach throw away bag – Hoover CONVERTIBLE U4057 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C. Attaching outer bag to cleaner
The outer bag is connected at the rear
of the cleaner. There are two projec
tions at the bottom of the outer bag
assembly.
To attach outer bag to the cleaner,
place the two projections at the bot
tom of the outer bag assembly inside
the metal grooved plate. (You will
find the grooved plate extending out
from the bottom rear of the cleaner.)
Fig. 1.
Just above the opening at the rear of
the cleaner is the bag clip. Pull the
bag clip to the left and fit bag against
opening. When you release the bag
clip, it should move to the right and
fit completely over the bag lock.
Fig. 2.
Attach the bag to the bag support
latch, which is located on the top
section of the handle. Fig. 3.
GROOVED
PLATE
D. How to attach throw
away bag
Unzip the outer jacket and pull out
tube. Roll rubber bag retainer down
the tube toward the cleaner.
Slip the open end of the throw-away
bag onto tube and push as far back
as possible. (Be sure to match arrow
on throw-away bag with the O mark
on the tube.)