The brushes, When to replace brushes, What brushes to buy – Hoover CONVERTIBLE U4057 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Replace agitator. On one end of
the agitator roll there is a raised metal

plate. Make sure that this end is
placed in groove on side of cleaner.

5. Place belt on pulley. Side of belt
nearer cleaner should be in line with
arrow on bottom of cleaner.

6. Replace metal plate. Place metal
knobs on front end of plate in wire
holders. Check to see that latches are
pushed back and wilt not be covered
by plate. Place plate in position and

latch securely.

The brushes

When to replace brushes

When brushes are worn and bristles
do not touch the edge of a card held

across the bottom plate, they should
be replaced. Always replace both
brushes at the same time to maintain

cleaning effectiveness.

What brushes to buy

When purchasing new brushes, ask for

Hoover part No. 19799. They are de

signed to be used with your cleaner.