The belt, When to replace the belt, What belt to buy – Hoover CONVERTIBLE U4057 User Manual
Page 15: How to replace belt ,15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The belt
The belt of your HOOVER cleaner controls the speed of the agitator and it is
important for the effective operation of your cleaner. The belt is located under
the bottom plate of the cleaner and should be checked from time to time to
be sure it is in good condition.
When to replace the belt
To check the belt, remove the bottom plate (see following section). If the belt
is stretched or cut; or if the agitator fails to rotate, replace the belt.
What belt to buy
To assure effective operation, use only genuine HOOVER belts with your
HOOVER 'Convertible' cleaner. When purchasing a new belt ask for Hoover
part
No. 49258.
How
to
replace the belt
Disconnect cleaner from electrical outlet.
1. Turn cleaner over. Remove metal
plate on bottom of cleaner by pushing
latches toward outside of cleaner.
2. Release worn belt from pulley.
3. Lift out rug agitator, remove old
belt and place new belt in groove of
rug agitator.
14