Crimestopper Security Products RS1905FM - Manual (Page 26)

26
TRANSMITTER PROGRAMMING
Transmitter Programming:
Notes: Remote Transmitters/Transceivers come pre-programmed from the Factory. When re-learning remotes or adding
remotes, ALL your system’s remote codes must be learned at time of programming!! These systems allow storage of up
to 4 different remote codes in memory. The “Sidekick” transmitters for the TW1/TW2 and FM systems are a special model
that is not compatible with each other.
1. Open hood (ground the Blue hood pin wire if no hood pin is installed.)
2. Turn key to the ON position. (Do not start vehicle) Pink wire must be connected!
3. Press Program/Valet button 4 times. Wait for the unit to flash the parking lights and/or honk horn exactly 4 times.
4. 1-Way systems: Press Button #1 (Lock) of the transmitter to be learned. 2-Way systems: Both the Lock & Unlock
buttons must be pressed. You should get 2 light flashes and 2 horn honks indicating the code-learn. Now the unit is
waiting for a 2
nd code, so repeat this step as needed with up to 3 additional remotes. The unit will flash the lights in
succession after each code learned for up to 4 codes. (3 flashes for the 2
nd
code, 4 flashes for the 3
rd
code and 0 for 4
th
code.) If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key OFF and close
the hood.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
(BLUE WIRE GROUNDED)
2-WAY SYSTEMS
1-WAY SYSTEMS
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
PRESS
LOCK ONLY
& "SideKick" REMOTES
COMPLETE