Chaparral FS2620R - Manual (Page 46)

FS2620R Rack Model User’s Guide
3-16
7 If the Loop ID screen displays, select the option or number you want to use and press
Enter.
The Router LUN screen displays. The text inside the parenthesis ( ) shows the
current Router LUN.
8 Select the option or number you want to use and press Enter.
The system confirms that you want to make the changes.
To Do this
Let the FC loop initialization process
determine the Loop ID for the channel each
time the router powers up
!
Select SOFT and press Enter.
This is the default setting
Keep the same Loop ID for the channel at all
times
!
Select the [Loop ID] you want to use
and press Enter.
This can be any number from 0 to
125.
Note: See Appendix A, Address and Device Mapping for more details on
how the value selected for the Loop ID will correspond to the AL_PA.
To Do this
Let the router determine the router LUN
each time the it powers up
!
Select SOFT and press Enter.
This is the default setting.
Keep the same LUN for the router at all
times
!
Select the [LUN] you want to use and
press Enter.
This can be any number from 00 to
63.
Not assign the router an FC LUN
!
Select NONE and press Enter.