Chaparral FS2620R - Manual (Page 39)

Accessing the Router Administrator Software
3-9
You can now perform all of the functions described in the rest of this chapter. All steps in
this chapter start from the System Menu.
Accessing the Network Management System
You can access the network management system software from the Router Administrator.
To access the network management system:
1 From the System Menu of the Router Administrator, select Configuration Menu
and press Enter.
2 Select LAN Config and press Enter.
The Enter Password screen displays. You can now access the network management
system screens and revise the settings as necessary.
Navigating the Router Administrator Software
You can navigate the Router Administrator software using your keyboard. Table 3-2
below describes the primary navigation and selection methods:
Table 3-2. Router Administrator navigation
To Do this
Select a menu item Press the ↑ and ↓ and press Enter.
or
Press the letter that is a different color (or
highlighted) in a menu item (hot key) and press
Enter.
Return to the previous menu or screen
without saving your changes Press Esc or ←.
Scroll through the available choices
for a setting Press the ↑ and ↓.
Note: After four minutes of inactivity, the Router Administrator software
times out and returns to the System Menu.