Chaparral FS2620R - Manual (Page 34)

FS2620R Rack Model User’s Guide
3-4
The Enter Password screen displays.
4 Enter your password and press Enter.
There is no default password, just press Enter.
Either the Network Management System Console screen or the Router Administrator
screen displays depending on the settings in the System Configuration menu. The
default setting takes you directly to the Router Administrator screen. If the Router
Administrator Software screen displays, press Enter to display the System Menu.
From the System Menu select Configuration Menu. From the Configuration Menu
select LAN Config. The the Network Management System Console screen displays.
You can configure the router’s network settings from here.
Note: If you try to connect more than one Telnet session at a time, you
will get an error message that a Telnet session is already opened, and your
new session will be disconnected.