Vexilar FL-22 - Manual (Page 14)

14
Auto Zoom
( FL-18, FL-20, & FL-22 HD Only )
Auto Zoom (AZ) puts the flasher into a split-screen view, with the complete water column on
the right and a magnified view from the bottom on the left. When you switch to Auto Zoom
Mode, the flasher automatically selects the magnified bottom view for you. However, you
do need to have the flasher set to a depth range in which the bottom is in view.
FL-18
Activate Auto Zoom by switching the Mode
control to the AZ selection on the right or the
left. The right selection operates Auto Zoom
at the normal power level. The left selection
operates Auto Zoom in Low Power Mode.
See 12. FL-20
Activate the Auto Zoom by switching the
Mode control to either the AZ 6’ or AZ
12’ setting to the right, or the AZ 6’ or AZ
12’ setting to the left. The right (Yellow)
settings operate with the display at full
brightness.
FL-22
HD
Auto Zoom
Activate the Auto Zoom by switching the Mode
control to the right for either the normal powered
AZ 6’ or AZ x2 (12’) setting. Turn the mode knob
to the left for Low Power AZ 6’. Please note that
the Auto Zoom feature will not function when
the range control is set to the 10 foot setting.