VACUUBRAND VACUU·CONTROL - Manual (Page 62)

Network configuration and updates
62 BA-N°: 999279/17.10.2014
7.2 Updates
The update is split into several steps, i. e. into separate submenus
 see separate buttons in “Quick navigation/Update“.
An authentication as admin is required to execute updates!
IMPORTANT!
> Required updates must be carried out in the
following order:
1. CVC 3000 firmware
2.
VACUU•CONTROL ® ‑LAN/WLAN
RC adapter firmware
3. VACUU•CONTROL ® GUI
user interface in your web browser
The required update files are provided online on our website
 Download .
Correlations between file extensions and update files:
File extension For update of
*.da1 CVC 3000 firmware
*.da2 VACUU•CONTROL ® LAN firmware
*.da2 VACUU•CONTROL ® WLAN firmware
*.da3 VACUU•CONTROL ® GUI (user interface)
7.2.1 CVC 3000
In order to use the VACUU•CONTROL ® application, your
CVC 3000 requires firmware version V2.30 (or higher).
For CVC 3000 controllers with firmware versions between V2.00
and V2.29, a firmware update is needed before establishing the
initial connection.
IMPORTANT! CVC 3000 controllers with firmware versions
earlier than V2.00 cannot be updated for use
with RC adapters.
Determine the firmware version loaded on CVC 3000
> First turn off, then turn on your CVC 3000 controller.
5
The firmware version is shown for a short time on the
CVC 3000 display.
Updates
File extension
update files
Required
CVC firmware