VACUUBRAND VACUU·CONTROL - Manual (Page 28)

Installation and connection
28 BA-N°: 999279/17.10.2014
Function
LAN adapter
4.3.2 LAN connection
The VACUU·CONTROL ® LAN adapter is the remote interface by
cable to your CVC 3000. As delivered, the LAN adapter acts as
DHCP server and client.
The LAN adapter can be connected directly to a computer or it
can be integrated into a network.
For integrating the adapter into a network we recommend the use
of a LAN switch or a LAN router  see chapter: “7 Network con-
figuration and updates”.
IMPORTANT!
In case of integration into a server, your system
administrator has to provide a free IP address.
Establishing LAN connection
1. Plug one end of the network cable (patch cable) into port at
LAN adapter.
2. Plug the other end of the network cable into Ethernet port of
your computer, router, or switch.
5
Device connected to LAN adapter.
>
Use the enclosed crossover adapter, if connecting directly
to a computer without Gigabit Ethernet connection, which
doesn’t support auto crossover.
>
As delivered, a DHCP server is active. The directly
connected computer automatically obtains a valid
IP address. Changing the network settings disables the
DHCP server.
4.3.3 Checking the connection
To verify that your LAN or WLAN adapter has been properly con-
nected, enter the IP address into the address bar of your web
browser.
If the
VACUU·CONTROL ® user interface on your web browser
matches to the connected CVC 3000, the connection has been
correctly established.