2 display symbols, Display and operating elements – VACUUBRAND VACUU·CONTROL User Manual
Page 35
Display and operating elements
35
BA-N°: 999279/17.10.2014
Pressure/Time graph
In addition to the bargraph the display can be switched to a dia-
gram which shows pressure vs. time. This diagram is similar to
the selection “Graphic” on CVC 3000.
Display pressure history
[pressure/time unit]
(example)
5.3.2 Display symbols
During operation further symbols
1
are indicated on the display.
Display symbols during operation
Icon
Meaning
Two-point control: pressure in hysteresis, pump switched off
Two-point control: pressure in hysteresis, pump switched
on
VARIO control: pump down to setpoint
Auto mode: detect boiling point
Detect: detect boiling point
VARIO control: vacuum has reached the setpoint
Auto mode: boiling point reached
Turbo mode switched on (for VARIO in combination with
turbomolecular pump)
1 -> for reasons of space, symbols can not be indicated in portrait orientation
onscreen of some mobile devices.
Display symbols/
display icons
fault-free operation
Example
graphic diagram