VACUUBRAND CVC 3000 detect - Manual (Page 15)

page 15 of 74
Assemble and lock the suitable power plug (included in
shipment) to the power supply prior to use.
The controller is equipped with a short-circuit-proof, wide-
range power supply with an integrated overload protec-
tion.
Position the controller and its vacuum line in such a way
that condensate cannot flow towards the pressure trans-
ducer.
In case connect inert gas at the venting connection.
Allow the equipment to equilibrate to ambient temperature
if you bring it from cold environment into a room prior to
operation. Notice if there is water condensation on cold
surfaces.
Comply with all applicable and relevant safety require-
ments (regulations and guidelines). Implement the re-
quired actions and adopt suitable safety measures.
Ambient conditions
➨
Do not reach for this product if it has fallen into liquid.
There is a risk of deadly electrical shock. Unplug the
system immediately.
+
Do not use this product in an area where it can fall or
be pulled into water or other liquids.
• Adopt suitable measures in case of differences from
recommended conditions, e.g., using the equipment
outdoors, conductive pollution or external condensa-
tion.
• Do not operate this product near flames.
To the best of our knowledge the equipment is in com-
pliance with the requirements of the applicable EC-direc-
tives and harmonized standards (see ”Declaration of Con-
formity”) with regard to design, type and model. Directive
NOTICE
NOTICE