VACUUBRAND CVC 3000 detect - Manual (Page 13)

page 13 of 74
General information
Remove all packing material from the packing box. Re-
move the product from its packing-box and retain all pack-
aging until the equipment is inspected and tested. Inspect
the equipment promptly and carefully.
If the equipment is damaged, notify the supplier and the
carrier in writing within three days. Retain all packing ma-
terial for inspection. State the item number of the product
together with the order number and the supplier’s invoice
number. Failure to check and give notice of damage will
void any and all warranty claims for those deficiencies.
Store the equipment in dry and non-corrosive conditions
(see also “Technical data”, pg. 21) if the equipment is
not used immediately.
+
Do not use any damaged equipment.
Intended use
+
Ensure that the individual components are only con-
nected, combined and operated according to their de-
sign and as indicated in the instructions for use.
Use only original manufacturer’s spare parts and
accessories. Otherwise the safety and performance
of the equipment, as well as the electromagnetic com-
patibility of the equipment might be reduced.
The CE mark or the cTÜVus mark may be voided if not
using original manufacturer’s spare parts.
+
Comply with all notes on correct vacuum and electri-
cal connections; see section “Use and operation”, pg.
24.
+
The controllers are designed for operation at ambient
temperatures and gas temperatures at the pressure
transducer between +50°F and +104°F (+10°C and
+40°C), or for short periods up to +176°F (+80°C) at
the pressure transducer (gas temperature). Periodical-
ly check maximum temperatures if installing the con-
NOTICE