VACUUBRAND MV 2 VARIO - Manual (Page 24)

page 24 of 41
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999035 / 15/12/2009
MODE
☞ Switching to pressure control, if pumping down is activated
(after pressing key START):
➨ Press key MODE.
☞ The actual pressure is stored as new set point, i.e. the con-
troller keeps the pressure constant.
Temporary switching to setting pressure control
MODE
☞ Switching if process control is inactive:
➨ Keep key MODE pressed while pressing key ▲.