USL CCR-200 - Manual (Page 2)

CCR-100
INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 2 -
Introduction
The CCR-200 is a personal closed caption display for use in movie theater audi-
toriums. It receives captions for up to six languages from a Sony STWA-C101
data transmitter.
Operation
Because of the auditorium channel selection requirement, we suggest the fi rst
few steps be handled by theater personnel.
1. Move the slide switch on the right side of the unit towards the front to turn the
CCR-200 on. A sign on screen should appear. Verify that the indicated battery
voltage is at least two volts. If less than two volts, replace or recharge the batter-
ies
2. The display will then scroll through the available channels (G1 to G7 and Y1
to Y7). Press the language button when the channel for the desired auditorium is
displayed. The display will say “Channel xx Selected” until a few seconds after
the button is released. If a mistake is made, and the wrong channel is selected,
turn the unit off and back on again to repeat the process.
3. When content with captions is run, the captions should appear on the display.