USL UPC-28C - Manual (Page 9)

- 8 -
UPC-28C Instruction Manual Ultra Stereo Labs, Inc.
Closed Caption Configuration
The system is configured using a web browser on a laptop computer. Connect
the laptop to the IRC-28C using a crossover Ethernet cable. A straight through
cable may be used on many laptops, but a crossover will work with all laptops. Set
the laptop IP address to 169.254.1.123 with a subnet mask of 255.255.0.0. Open
a web browser and go to http://169.254.1.1 . A page similar to that below should
appear.
Click “System Configuration” to get to the configuration screen. You will be
prompted for a username and password. The username is admin and the pass-
word is ultra. A configuration screen similar to that below should appear.