USL UPC-28C - Manual (Page 7)

- 6 -
UPC-28C Instruction Manual Ultra Stereo Labs, Inc.
UPC-28 Installation
Unpack the carton and verify that all materials are present.
There should be:
One system manual
One IRC-28C Emitter Panel
One IRP-20 DC Power Pack
One Mounting Bracket composed of 1 ea. IRBS-20 & IRBE-20
Two 10-32 x 5/8 machine screws for attaching the emitter panel to the
mounting bracket.





A small jeweler’s type flat blade screwdriver or trim pot alignment tool for
adjusting the input audio levels.
A medium flat blade screwdriver for attaching the mounting bracket.
Shielded, two conductor audio cable for connection of the IRC-28C to the
program source.
Eighteen gauge or larger; two conductor “zip” cord to connect the DC power
pack to the emitter panel.
Tools and hardware to attach the mounting bracket to the wall
One IRH-230 receiver.
One CCR-100 Closed Captioning Receiver.
Laptop computer.
CAT 5 Cable









You will need to supply the following materials: