USL XTM-300 - Manual (Page 5)

5
2. Regulatory Compliance
EN 60950-1
The EN 60950-1 standard specifies the safety design requirements that reduce or eliminate
the risk of personal injury to both the product user and service personnel. This product is
designed and tested to meet the standards of the International Electrotechnical Commission
(IEC) European Norm EN 60950-1, IEC 60950-1 (the standard for information technology
equipment including electrical business equipment).
Declaration of Conformity
The XTM-300 meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low
Voltage Directive 73/23/EEC for Product Safety. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European Communities:
EN 55022: 2006 Conducted and Radiated Emissions

Conducted Emissions

Radiated Emissions, Class A Limits
EN 55024: 1998 + A1: 2001 & A2: 2003 Immunity

Electrostatic Discharge Immunity

RF Electromagnetic Field Immunity

Power Line Surge Immunity

Conducted RF immunity

Power Frequency Magnetic Field Susceptibility

Voltage Dips, Short Interruptions and Variations

EN 61000-3-3: 1995 +A1: 2001 & A2: 2005 Voltage Fluctuation and Flicker
FCC Part 15, Subpart B
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at user’s own expense.