Twin City BSI / DSI Square Inline Centrifugal Fans - IM-4205 - Manual

Models BSI – 080A through 402A Models DSI – 080A through 165A
Nomenclature
BSI - 120 A HP
BSI = Belt Driven Centrifugal Inline
DSI = Direct Drive Centrifugal Inline
Receiving, Inspection, & Unpacking
When the equipment is received all items should be
carefully checked against the bill of lading to be sure all
crates and cartons have been received. Before accept-
ing delivery, carefully inspect each carton or crate for
visible shipping damage. If any damage is noticed, the
carrier should make the proper notation on the delivery
receipt acknowledging the damage. Make notations of all
damage on all copies of the bill of lading and have all
copies countersigned by the delivering carrier. The car-
rier should also fill out a Carrier Inspection Report. The
factory Traffic Department should then be contacted.
File claim for damage with the carrier. Physical damage
to the unit after acceptance is not the responsibility of
Twin City Fan Companies, Ltd.
Unpack each carton or crate and verify that all required
parts and proper quantities of each item have been
received. Refer to drawings for part descriptions. Report
shortages or missing items to your local representative
to arrange for replacement parts.
Due to availability of carriers and truck space, it is not
possible to guarantee that all items will be shipped
together. Verification of shipments must be limited to
only those items on the bill of lading.
The unit nameplate must be checked to make sure the
voltage agrees with the power supply available.
©2014 Twin City Fan Companies, Ltd.
Twin City Fan & Blower Catalog 4205 provides additional information on this equipment. This catalog can be found
at www.tcf.com or by contacting your local Twin City Fan & Blower sales representative.
Design Vintage
Size
High Pressure
IM-4205
August 2014
Centrifugal Square Inline Fans
INSTALLATION, OPERATION & MAINTENANCE MANUAL