Firmware upgrade – Crestron electronic STX-1700CXP User Manual
Page 29
Crestron STX-1700CXP
2-Way RF Wireless Touchpanel
Operations Guide – DOC. 6144
2-Way RF Wireless Touchpanel: STX-1700CXP
• 25
Select VTZ File
6. Disconnect the programming cable and the external power pack from the
touchpanel.
7. Close the Viewport, exit VT Pro-e, and disconnect the programming cable
from the PC and the control system.
Firmware Upgrade
A firmware upgrade file has the
extension .csf
Firmware upgrade files can be obtained from the Downloads | Software Updates |
Touchpanels section of Crestron’s website
upgrade the
STX-1700CXP firmware, complete the following steps.
1. Make sure that “Communication Settings” that begins on page 20 has been
performed. Suggested baud rate is 38400.
2. As shown below, select File Transfer | Update Touchpanel/Keypad
Firmware from the Viewport menu.
Select Update Touchpanel Firmware
3. As shown on the next page, select the NET ID of the STX-1700CXP and
then click OK.