Config – TruTrak EMS BU (8300-065) User Manual
Page 7
TruTrak Flight Systems
5
EMS Installation Manual
JUNE 2009
8300-065 Rev D
CONFIG
#CHT, #EGT, #FUEL, MP, FLOW, FLAPS, V TRIM, H TRIM, #SW, AMPS, OAT, CARB, BKUP,
COMPLX.
These pages will allow the selection
of the different type and quantity of
indicators displayed. Select the
sensors that are installed and the
quantity as needed.
Example:
Press and release # CHT to select number of CHT
probes installed,
4
as shown to the right.
BKUP displays the engine
instrument with Airspeed, T&B,
Altimeter/VSI in upper part of
display. (right)
The far right picture is shown
without BKUP selected
As shown on the right pictures, the
COMPLX engine dial instruments
will move the MP to the left side.
COMPLX will also switch the MP to a more detailed display in the
BKUP mode. RPM (digital)and MP (analog display) swap for more
detailed information.