Tach, Snsrs, Flaps and trim – TruTrak EMS BU (8300-065) User Manual
Page 10: Speeds, Ball (slip)
TruTrak Flight Systems
8
EMS Installation Manual
JUNE 2009
8300-065 Rev D
TACH
Select the pulses per revolution,
Lycoming 4 cyclinder = 2
Rotax = 1
SNSRS
FUEL, CHT, OIL;
FUEL Select the type of sender,
Resistive or Capacitance
CHT Select type of Sensor, J type
(J THC), Resistive (VDO), PT100
OIL Select
type of Sensor,
Honeywell (WSTCH), Resistive
(VDO), PT100
FLAPS and TRIM
Select the gauge to calibrate,
exp: FLAP, move the flap to full up
and press and release the button
labeled NONE. Continue to HALF
and FULL down positions, pressing
the button for each.
SPEEDS
Select the Baud rate for your GPS input, 9600 or 4800.
BALL (SLIP)
Center the BALL in the T&B after EFIS installation.