Trending Accessibility BARRIER FREE SHOWER PAN - Manual (Page 3)

Framing pocket must be sized according to the information provided in the Framing Diagram.
Framing must be extremely square and plumb in order to accomplish a successful installation. 2.
It is extremely important that the floor area intended for the installation be flat and level. Any areas over
1/8” out-of-level will prevent the installation from being successful. If an area out more than 1/8” is found,
float the floor area with a floor leveling compound. This material must be placed and cured (dry) before
proceeding with the shower installation. 4.
1. Prepare the installation area by sweeping the area completely clean.
3. If wall board and finished materials for the wall enclosure have been determined, Install hot and cold water
supply lines with the control valve. Mount to the framing.
INSTALLATION INSTRUCTIONS
3
FRAMING DIAGRAMS
Note: Unit will not install properly if framing pocket is not
square and of proper size. The dimensions shown in the
FRAMING DIAGRAMS are 1/4” larger than the size of the
shower pan. This product is manufactured to tight
specifications. The 1/4” over sizing is for manuvering and
installation ease. If 1/4” over is not reasonable, sizing closer
to the product actual dimensions is allowable.