Trending Accessibility BARRIER FREE SHOWER PAN - Manual

READ ALL INSTRUCTIONS BEFORE INSTALLATION
PLANNING YOUR INSTALLATION
Avoid exposure to weather. Product carton is not waterproof. Carton exposed to rain or snow may result in
accummulated water penetrating the back laminates of the shower pan and soak the glassed in
reinforcement supports causing bulges in the gelcoat surface. 1.
Most handling damage is the result of impact blows to the back of the fiberglass units. 2.
Never drag this fiberglass product on any surface. Always carry the pan or use a two wheel dolly.
Due to the size and weight of the product, installation is easier if it is a two person operation. 3.
Never drop the fiberglass shower pan from any height, not even an inch or stress cracks are likely to occur. 4.
Placing objects inside the unit can cause scratches or nicks to the finished surface.
Do not use the shower pan as a trash receptical! Always place a drop cloth or cardboard on the floor
when working inside the shower. 5.
Never clean fiberglass gelcoat surface with metal tools of any kind, including razor blades. 6.
TOOLS NEEDED:
Nails Hammer
Drill With Phillips Screw Bit
1/2” Notched Trowel
Spatula
Auger Mixing Tool For Drill
Caulking Gun
4 Foot Level
2 Foot Level
50+ 1 1/4” Wood Screws
Solid Wood Flooring Adhesive
(2-One Gallon Buckets Per Shower)
(For Mixing Bedding Compound And Water Test Around Drain)
2-Gallons Of Water
1-Tube 100% Clear Silicone Caulking
3 - 8 Foot 2 x 4’s
1 - 8 Inch Long 2 x 4
1 - 24 Inch Long 2 x 4
2 - Large Wiping Cloths
Self-Caulking Shower Drain Fitting
MATERIALS NEEDED:
1/8” Drill Bit
1/4” Carbide Tipped Drill Bit
Center Punch
1
BARRIER FREE SHOWER PAN
INSTALLATION INSTRUCTIONS
856-488-9535 www.TrendingAccessibility.com