Trending Accessibility Transitional & modern linear fusion shower pan recessed into concrete - Manual (Page 7)

Installation Guide
www.trendingaccessibility.com [email protected]
7
for linear shower pan recessed into concrete
Step 18
Apply two coats of liquid waterproofing to achieve
2 mils. (roughly the thickness of a credit card)
Step 19
You are now ready to tile. If you are using large
format tiles, they must be cut diagonally and laid
to follow the pitch in the Fusion Pan (From the
corners of the grate frame to the corners of the
Fusion Pan). Apply the tile adhesive, and lay the
tiles in a regular pattern.
Step 17
Begin the application of the liquid waterproofing
membrane. Paint a layer of liquid waterproofing over
all taped joints. It is easiest to begin with the walls
first and then proceed to the floor area. For con-
sistant application, use a paint roller to apply water-
proofing to all surfaces. After first coat is dry, re-coat.
Best Practice
To achieve the best results, we recommend water-
proofing the whole room.