Trending Accessibility Transitional & modern linear fusion shower pan recessed into concrete - Manual (Page 3)

Installation Guide
www.trendingaccessibility.com [email protected]
3
for linear shower pan recessed into concrete
Step 1
For optimal performance, it is imperative there is
a level surface prior to installation of new Linear
Fusion Shower Pan. Check existing floor to make
sure it is level. If it is not, please correct prior to
installation. Place the Linear Shower Pan in de-
sired location and mark the edge of the pan on the
concrete.
Step 2
Using suitable equipment, and proper safety gear,
carefully cut along your line as accurately as pos-
sible to a minimum depth of 1”. It may be easiest
to score the concrete approximately every 1” to 2”
inside your perimeter line, to make the removal of
the concrete more efficient. Now, excavate all of
the remaining concrete in the marked area.
Note: If possible, please check or mark loca-
tion of existing plumbing and electrical to avoid
damaging them.
Step 3
Place the Linear Shower Pan into place. Once pan
is set to desired loaction, note the location of drain
to remove enough concrete for the installation of
the waste pipe and drain body.
Step 4
Install the drain in accordance with current plumb-
ing and building codes.
Use a dust free saw
to make the work
area more pleasant