Trending Accessibility Adjustable fusion shower pan on wood joists - Manual (Page 10)

Installation Guide
www.trendingaccessibility.com [email protected]
10
for adjustable fusion shower pan on wood joists
Step 26
Apply two coats of liquid waterproofing to achieve
40 mils. (roughly the thickness of a credit card)
Make sure that the “V” section of the gasket clamp
is filled with the liquid waterproofing.
Step 27
In order to set the correct height of the grate frame,
you may need to use the height extension ring
(see diagram to the right). If the height extension
ring is required, it will need to be fixed to the height
adjustment ring using solvent cement. The grate
frame can now be attached to the height adjustment
or extension ring, depending on tile thickness. This is
done by using firm pressure to clip the components
together; it is a tight fit.
Step 25
Continue the application of the liquid waterproofing
membrane. Paint a layer of liquid waterproofing
over all taped joints. It is easiest to begin with the
walls first and then proceed to the floor area. For
consistant application, use a paint roller to apply
waterproofing to all surfaces. Allow the waterproofing
to dry for about 4 hours. After first coat is dry, re-coat.
“click”
extention ring
adjusting ring
1/4” to 5/8” Tile Height 5/8” - 1” Tile Height
grate frame
grate frame
adjusting ring
Pro-Tip
To achive the best results, we recommend
waterproofing the whole room.