Trending Accessibility Fusion shower pan surface mounted on concrete - Manual (Page 5)

Installation Guide
www.trendingaccessibility.com [email protected]
5
for fusion shower pan surface mounted on conrete
Step 5
Install the drain in accordance with current
plumbing and building codes.
Step 6
Set the Fusion pan into place and check to make
sure the pan is level. This is important to achieve
proper drainage. If you notice any rocking or
flexing in the pan, you may need to shim or shave
areas.
Step 7
Important: You must sand the top of the pan
lightly with a palm or belt sander to roughen up the
surface for proper adhesion of waterproofing.
Step 8
To prep for permanent installation, remove the
Fusion pan from the surface. Apply a generous
amount of construction adhesive to the concrete
floor. Place the pan down into position and apply
pressure to adhere the pan to the concrete.