Trending Accessibility Fusion shower pan on wood joists - Manual (Page 9)

Installation Guide
www.trendingaccessibility.com [email protected]
9
for fusion shower pan on wood joists
Step 22
Begin the application of the liquid waterproofing
membrane. Paint a layer of liquid waterproofing
over all taped joints. It is easiest to begin with the
walls first and then proceed to the floor area. For
consistant application, use a paint roller to apply
waterproofing to all surfaces. Allow to dry for about 4
hours. After first coat is dry, re-coat.
Step 23
Apply two coats of liquid waterproofing to achieve
2 mils. (roughly the thickness of a credit card)
Make sure that the “V” section of the gasket clamp
is filled with the liquid waterproofing.
Step 21
Now attach the clamping ring. Apply primer and
solvent cement to inside of clamping ring. Press
firmly into position and allow the solvent to set.
It may take about 60 seconds for the cement to
form a bond.
NOTE: Do not allow the solvent cement to come
into contact with the membrane
Gasket Clamp
Drain Adapter Flange
Gasket Membrane
Best Practice
To achieve the best results, we recommend
waterproofing the whole room.