Camera installation procedure – Toa C-CH100FH User Manual
Page 11
10. CAMERA INSTALLATION PROCEDURE
Camera with a standard or wide angle lens
Camera with a zoom lens
Butterfly bolt
Auxiliary mounting holes
for butterfly bolts
Base
Lens orientation
Camera mounting plate
Camera mounting bolt
Plain washer
Spring washer
1. Detach the camera mounting plate from the housing base
.
2. Mount the camera on the camera mounting plate and secure the camera to the mounting plate using the
supplied camera mounting bolt, plain washer and spring washer. When an adequate view angle is not
available with the preset butterfly bolt position on the camera mounting plate, use the auxiliary holes.
3. Perform wiring to the camera.
4. Using the butterfly bolts, fix the camera-installed mounting plate to the housing base so that the lens is
positioned as close to the housing window as possible.