Toa C-CC774 PL - Manual (Page 20)

20
8.4. Attaching Housing and Camera Unit to Wall Mounting Bracket
Before attaching the housing, waterproof the cable hole with silicone sealant material.
1. Loosen 2 safety screws.
2. Run the safety wire through the top cover, then hang the hook to the mounting bracket.
3. Run the top cover through the pipe, then connect cables.
Top cover
Wall surface
Safety wire
Housing
Insulate the terminals by
wrapping the (vinyl) insulating
tape around it.
Refer to p.10 “Precautions
when installing the camera”.
Safety screw
Safety wire
Safety screw
Housing
Housing
Cable hole