Toa C-BC711P - Manual (Page 4)

Note: The design and specifications are subject to change without notice for improvement.
Be sure to refer to the instruction
manual supplied with the Camera.
Nut
Washer
Spring washer
Hexagon socket bolt
Safety wire * 1
Suspension Bracket
C-BC711P
Top cover
Camera mounting screw
(accessory)
Housing
Camera unit
Dome cover
Safety wire
for camera unit *
1
Ceiling surface
Safety wire
for dome cover *
1
* 2
Anchor bolt * 2
M8, M10 or W 3/8
Base: aluminum, Light gray, paint
Pipe: SUS304
140 (W) x 164 (H) x 200 (D) mm (5.5 (W) x 6.5 (H) x 7.9 (D) inch)
1.0 kg (2.2 lb)
Finish
Dimensions
Weight
Accessory:
Camera mounting screw (M5 x 12 with
washer) .....3
Notes:
*
1 Be sure to attach the Housing and the
Camera after hanging the safety wire.
* 2 Washers, spring washers, nuts and
anchor bolts are not supplied and should
be acquired separately.
4. INSTALLATION
5. SPECIFICATIONS
133-05-390-8A