Toa C-BC511U-S - Manual (Page 4)

Bracket : Aluminum, black, paint
Bezel : PC/ ABS resin, cool gray
Dome cover : Acrylate resin, transparent (C-BC511U)
: Acrylate resin, smoked (transmittance: approx. 20%) * (C-BC511U-S)
ø250 x 282.7 (H) mm (ø9.8 x 11.1 (H) inch)
(dome external diameter : ø125 mm (ø4.9 inch))
1.2 kg (2.6 lb)
C-CC514, C-CC564, C-CC574, N-CC2564
Finish
Dimensions
Weight
Applicable camera
* When using the C-BC511U-S, the subject's illumination must at least be 5 times brighter than when using
the C-BC511C.
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
4
5
2
1
3
Safety wire
(accessory)
Flush ceilimg
mounting anchor bolt
Ceiling panel
Positioning mark
Flush Ceiling
Mounting Bracket
C-BC511U
C-BC511U-S
Base unit
Combination
Camera (optional)
C-CC514
C-CC564
C-CC574
Network
Combination Dome
Camera (optional)
N-CC2564
Camera unit
Positioning mark
Bezel
Space between
mounted panel
and upper ceiling
250 mm (9.8 inch)
or more
Ceiling panel 40 mm
(1.6 inch) or less
ø230 mm ( ø 9.1 inch)
Be sure to carefully read the installation
manual supplied with the camera.
1. Attach the base unit to the flush ceiling
mounting bracket.
Note
Use the camera mounting screws
supplied with the combination camera
when attaching the base unit.
2. Attach the flush ceiling mounting bracket
equipped with the base unit to the flush
ceiling mounting anchor bolt installed
into the upper ceiling (ceiling behind the
ceiling panel).
3. Connect cables and attach the camera
unit to the base unit.
4. Align the bezel's positioning mark with
that on the flush ceiling mounting bracket
and insert the camera into the mounting
bracket.
5. Rotate the bezel counterclockwise until it
locks into place.
[ Main body mounting view ]
[ Installation dimensional diagram ]
4. INSTALLATION
5. SPECIFICATIONS
133-05-394-4A
Safety wire ................................................. 1 Pattern paper ............................................. 1