Coleman Tent 9805-130 - Manual

Connect Frame to Tent
– Insert one Pole Tip into grommet on stake loop
located at middle edges of the tent.(illus. 3).
– Go to opposite end of pole and
gradually apply pressure to the
pole forming an arch until you
are able to insert the pole tip
into the grommet.
(illus. 3 & 4)
1
2
Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with door facing
desired direction. (illus. 1)
– For best results in windy conditions position
end of tent into the wind.
– Stake down tent corners using the stake loops.
Keep the floor taut. Unzip door. (illus. 2)
– Assemble Frame Poles by interlocking
shock-corded sections. This will make one long
and one short curved pole.
– Insert the longer pole through the pole sleeve
located in the middle of the tent and the shorter
pole into the sleeve at the foot of the tent (illus. 1)
Main Tent Pole (1) Silver)
Part No. 9805-1001
Foot Pole (1)_ Gold Tips
Part No. 9805-1002
illus. 1
Zipper Door
Pole Sleeve
illus. 2
Tent stake
through Loop
illus.3
Insert Pole Tip
into grommet
illus.4
Tent completely set up
and staked out.
POLE ASSEMBLY PART
blaze solo
part number 9805-130
Rainfly
Part No. 9805-1051