Toa S-D7300 - Manual (Page 6)

6
8. OPERATION
Step 1. Confirm that the wireless transmitter and the wireless receiver are identical in group, channel, and ID
numbers.
Step 2. Plug the output terminal from the microphone or musical instrument into the unit's Microphone/
instrument input terminal, then secure the connection by tightening the joint knob of the microphone or
musical instrument cable.
Step 3. Set the Microphone/instrument selector switch according to the equipment to be connected to the
Microphone/instrument input terminal.
Step 4. Turn on the power switch. Then, confirm the battery indicator lights green or orange.
Step 5. Turn off the power switch after use.
9. OPERATIONAl HINTS
• When using 2 or more wireless transmitters, keep them at least 50 cm away from each other to avoid
malfunctions or noise.
• Keep the wireless transmitter at least 3 m away from the receiving antenna. Using the transmitter in close
proximity to the antenna could result in malfunctions or noise.
It is recommended that the wireless receiver’s built-in antenna attenuator be set for appropriate attenuation
level when it is unavoidable to use the transmitter closer to the antenna.
Note: This distance differs depending on the installation location of the antenna and the length of the wired
coaxial cable.