TeeJet FieldPilot Install Ford NH 8x70 - Manual (Page 17)

www.teejet.com
15
FieldPilot ®
11. install steering disengage switch (kit 91-07011)
The steering disengage kit (Z) is used to automatically disengage FieldPilot when the steering wheel is
turned. The magnets mount on the steering shaft or other rotating part of the steering wheel and the sensor
mounts so that there is a 1/8″ clearance between the sensor and magnet.
Figure 1-11: Install Steering Disengage Switch (Kit 91-07011)
12. installation oF engage/disengage switch
Connect item (A) to the connector on the SCM harness labeled Remote Engage/Disengage. Install the push
button in a location that is easily accessible during operation of the machine. This switch (A) is not required
if the optional foot switch 32-04020 is used.
Figure 1-12: Engage/Disengage Switch