Fieldpilot, Wr v, Prepare the shuttle tee – TeeJet FieldPilot Install Ford NH 8x70 User Manual

Page 11: Install the fieldpilot valve bracket

www.teejet.com

FieldPilot

2. PrePare the shuttle tee

Install adapter

(V)

into the branch of the shuttle tee

(R)

. Install adapters

(W)

into both ends of the run of

the tee. Point the

(W)

adapters in opposite directions.

Figure 1-3: Prepare the shuttle tee

3. install the FieldPilot ValVe Bracket

The valve bracket will mount to the vehicle’s frame on the left side. Using the existing hole just below the

Engine Oil Cap, mount the

(K)

bracket with (1)

(H)

5/8” bolt, (1)

(J)

5/8” nut and (2)

(F)

5/8” washers.

Figure 1-4: Install Mounting Bracket for FieldPilot Valve