Fieldpilot, Phose k, Hose k hose i – TeeJet FieldPilot Install AGCO RoGator 854 (1997-2002) Models User Manual
Page 13: Install adapter m here, Hose i, Install the ef hose, Install the tank hose
www.teejet.com
12
FieldPilot
®
6. install the eF hose
Oil will exit the FieldPilot valve through hose
(K)
which will be connected to the original EF hose removed
from the orbital in Step 5. Install the 90° adapter
(P)
on the hose that was disconnected from the EF port
of the Orbital. Connect hose
(K)
to the adapter
(P)
just installed. Route this hose to the EF port on the
FieldPilot Valve. It will route behind the sheet metal and frame.
Figure 1-7: Install the EF Hose
P
Hose K
Hose K
Hose i
7. install the tank hose
The tank fitting is on the right side of the orbital. Disconnect the hose and install run tee
(M)
. Reconnect the
original hose to the run of the tee and connect the 90° end of hose
(I)
to the branch of the run tee and route
it to the T port of the FieldPilot Valve.
Figure 1-8: Install Tank Hose
install adapter M here
Hose i