TeeJet LH 1600M - Manual (Page 12)

LH 1600M O PERATORS MANUAL
12 LH A GRO
HOLD FUNCTION
Key Function
Pressing this key effectively locks the actual bout number, i.e. the drill
can be raised without increasing the track number and the present
tramlining state remains unchanged.
The hold status is displayed. When the dash next to the hold symbol
is lit the hold function is activated:
The hold function can be cancelled by pressing the key again.
MANUAL UP/DOWN ACTUAL BOUT COUNTING
Key Function
Manual up/down counting of the actual bout number can only take
place when the tramline function is selected.
This function can be used if the drill has been raised in the middle of a
bout, when actual bout counting is not required.
The up or down key should be pressed for approx. 2 seconds and the
actual bout number is increased or reduced.