TeeJet LH 1000 - Manual (Page 14)

F ITTING THE LH 1000 LH 1000 O PERATORS & F ITTING MANUAL
14 LH A GRO
FITTING THE AREA ON/OFF (IMPLEMENT) SENSOR
Typical fitting of the implement sensor on the tractor’s lift arms:
The implement sensor can be fitted in other positions (PTO handle, hydraulic
cylinders, other handles, etc.). There must be movement of minimum 50 mm. The
distance between the sensor and the magnet must not exceed 5 mm.
An electrical signal from, i.e. a sprayer switch box, etc. can be used as the
implement signal. The signal must change to 0V (ground), when the implement is
not working.
+ 12 V +12 V + 12 V
a. b. c.
LIFT UP
LIFT
MAIN SWITCH
SPRAYER ON/OFF
SIGNAL
ELECTRIC
SPRAYER FITTING COMP.
SWITCH
ELECTRIC
VALVE
SIGNAL SIGNAL
IMPORTANT! Never connect power (+12V) to the brown output on the LH 1000,
as this will damage the LH 1000.