TeeJet SmartPad II Status Detect Guide - Manual (Page 2)

Bulletin 98-01123 R1 Page 2 of 2
1. From the Main Launcher page (first screen after powering on) select Guidance by highlighting and
pressing the enter key or by using the touch screen and touch guidance.
2. The next screen is the Start Guidance / Setup screen. Select Setup to advance to the Guidance,
Data, and Lightbar setup selections, select Guidance to bring up the guidance setup options.
3. The final step is to select Status Detect from the setup options. Use the down arrows to scroll and
find Status Detect. Status Detect has two settings, Off and 1 Section. Select Status detect and use the
Up and Down arrows on the SmartPad to select between OFF and 1 Section, press the enter key to
accept the selection.