TeeJet LH 500 - Manual (Page 14)

O VERVIEW LH 500 C OMBINE MONITOR OPERATORS MANUAL
TIME FUNCTIONS
Key Description
Pressing the time function key displays the following functions:
Start:
Pressing this key starts the stopwatch. When the
stopwatch is running the time can be seen in the top
right-hand corner of the display.
The function of this key changes to “Stop” when the
stopwatch is running. To stop the stopwatch simply
press the “Stop” key.
End:
Pressing this key displays the time remaining for the
current field based on the current working width,
present forward speed and the encoded HA Left. This
is shown at the top right-hand corner of the display.
REDUCED WORKING WIDTH FUNCTION
Key Description
Each press of this key cycles through the following and changes the
reduced working width indicator (pos. 12):
3/4:
The encoded working width is reduced by ¼.
1/2:
The encoded working width is reduced by ½.
1/4:
The encoded working width is reduced by ¾.
Press the key once more and the full working width will
be used.
14 LH A GRO