TC-Helicon VoiceLive Rack - Basics Manual - Manual (Page 15)

15
Basic Operation
Restoring individual presets to factory settings
To reset a preset to its original settings:
1. Locate the Manage Preset tab in the Store menu.
2. Use Erase User Preset to select the preset to restore and set Con-
firm to Yes.
3. Touch the Store button.
Mic Control and Footswitch assignments
External control of parameters via the MP-75 microphone and Switch 3
footswitch can be assigned uniquely per preset or globally.
To set Mic Control and Footswitch assignments:
1. Locate the Mic-Control and/or Switch3 tabs in either the Setup
menu (for global assignment) or in the Edit menu (unique per
preset).
2. Make the changes required.
3. If you have made a preset assignment it will need to be stored
with the preset. Global assignment does not require storing.
To add a step to a preset:
1. Locate the desired starting preset and hold the right Step arrow
button.
2. Follow the onscreen prompts to insert and delete steps in your
chain.
Note that inserted steps are automatically stored. See “Restoring...” below
to return the preset to its original state.
Performing a global reset
This can be performed to initialize all presets and system parameters
back to their factory defaults.
To perform a global reset:
1. Power up the unit.
2. When the first text is displayed in the LCD window, hold the 4
buttons listed below and continue to hold until the reset prompt is
displayed:
• µMod
• Delay
• Reverb
• Tone
This procedure can take up to 2 minutes.